 |
FC-007A
K&LAN
| Quantity: | |
|---|---|
The FC-007A glass to wall bubble shower door seal is designed for hinge-side gaps of swing shower doors, creating a seal between the glass panel and adjacent wall or floor surfaces. It supports standard glass thicknesses and multiple length options, and is suitable for both residential bathrooms and commercial shower facilities.
All product dimensions and specifications follow original production standards, as detailed in the table below.
Parameter | Value |
Model | FC-007A |
Brand | K&LAN |
Compatible Glass Thickness | 6/8/10/12mm |
Available Length | 0.7m / 0.9m / 2.2m / custom length |
Bubble Height | 6-12mm |
Installation Position | Hinge side, floor or bath |
The seal features a multi-layered profile with an inner core for structural stability and an outer layer for surface wear resistance. The profile is shaped to fit flush against shower trays, walls and door edges, creating a continuous barrier along the installation gap. All edges are rounded to prevent cuts or scratches during handling and daily use.
The seal is manufactured from a flexible composite polymeric material that balances rigidity and elasticity. The material maintains its shape and sealing capacity across typical bathroom temperature and humidity ranges, including the elevated heat and moisture levels found in steam shower environments.
When properly installed, the seal forms a continuous barrier along the hinge-side gap of the shower door, restricting water from escaping the enclosure. The bubble profile compresses slightly against the mating surface to close small gap variations.
The seal material resists degradation from common shower products including shampoos, soaps and conditioners. It also inhibits mold, mildew and bacteria growth on its surface, which supports hygienic conditions in high-use shower facilities.
The seal comes with a self-adhesive backing that bonds to clean, dry mounting surfaces. The adhesive creates a stable bond that holds the seal in place during regular door operation and water exposure. Installation can be completed without specialized tools, reducing on-site labor time.
This seal works across residential bathroom configurations, including swing-door shower enclosures, walk-in showers and bath screens. It also supports commercial procurement for facilities such as hotels, gyms, spas and public swimming pool shower areas. The seal is compatible with glass, acrylic, tiled and stone shower surfaces, making it suitable for new construction and renovation projects. It also performs in steam shower environments, as the material withstands sustained high humidity and elevated temperatures.
Clean and fully dry the installation surface before fitting. Cut the seal to the required length with standard cutting tools. Remove the adhesive backing film and press the seal firmly along the hinge-side gap, ensuring full contact along the entire length. Allow the adhesive to set fully before regular use.
Wipe the seal regularly with a damp cloth or mild soap solution to remove surface residue. Avoid abrasive cleaning tools or harsh scrubbing, as these may damage the seal surface. A diluted vinegar and water solution can be used for deeper cleaning of accumulated residue. Dry the seal surface after cleaning to reduce moisture retention.
Under normal use conditions, with proper installation on a clean and dry surface, the adhesive backing maintains its bond for several years. Extreme temperature fluctuations, persistent high humidity or frequent movement of adjacent components may reduce adhesive lifespan. If peeling occurs, the seal can be resecured with a compatible adhesive.
Yes, the seal material is compatible with steam shower operating conditions. It retains its sealing properties under sustained high humidity and elevated temperatures, restricting steam escape from the enclosure and protecting surrounding surfaces from moisture damage.
Wipe the seal regularly with a soft damp cloth or mild soap solution. Do not use abrasive scouring pads or harsh chemical cleaners, as these can damage the material surface. For deep cleaning, use a diluted vinegar and water solution, then rinse and dry the seal thoroughly.
This seal is produced in a neutral clear finish that integrates with most bathroom decor styles. Custom color requirements for large commercial orders can be discussed with the supply team. Color-matched caulk can also be used around the seal edges to match specific project finishes.
