 |
FC-007
K&LAN
| Quantity: | |
|---|---|
The glass to wall bubble shower door seal is designed for gap sealing between shower glass panels and adjacent walls or floors. It fits common shower glass thicknesses and supports multiple length options, making it suitable for various shower enclosure setups in both residential and commercial spaces. The seal forms a physical barrier to reduce water spillage from the shower area.
All dimensional parameters follow standard production specifications as listed below.
Parameter | Value |
Model | FC-007 |
Brand | K&LAN |
Compatible Glass Thickness | 6/8/10/12mm |
Available Length | 0.7m / 0.9m / 2.2m / custom length |
Bubble Height | 6-12mm |
Installation Position | Glass or wall, floor or bath |
Glass Thickness | Matching Dimension |
6mm | 7mm |
8mm | 8mm |
10mm | 9mm |
12mm | 9mm |
The seal features a smooth, continuous profile that sits flush against shower trays and wall surfaces. Edges are finished with rounded contours to avoid sharp contact points and reduce risk of surface scratches or injury during handling and installation. The design prioritizes straightforward installation, with a process that does not require specialized tools.
The seal material maintains stable physical properties under typical hot and cold shower temperature fluctuations. It also resists UV exposure, which slows surface brittleness and degradation from prolonged light exposure. The material retains flexibility across normal bathroom temperature ranges, supporting consistent contact with mounting surfaces.
When installed correctly, the seal creates a continuous barrier along the gap between glass panels and walls or floors. This barrier restricts water from escaping the shower enclosure, reducing moisture exposure to surrounding bathroom surfaces.
The seal comes with an adhesive backing that bonds to clean, dry installation surfaces. Once fully set, the adhesive holds the seal in place during regular shower use and door movement.
The seal is available in multiple color options. Procurement teams can select options that align with existing bathroom tile, fixture and wall finishes to maintain consistent visual design across projects.
This seal works across residential bathroom setups, including tiled shower areas, frameless glass enclosures and walk-in showers. It also supports commercial procurement for facilities such as hotels, gyms, spas and public shower rooms. For renovation projects, the seal can replace worn or damaged existing seals without complex modification to the original shower structure. Custom length options accommodate non-standard shower dimensions for bespoke project requirements.
Before installation, clean the mounting surface thoroughly and ensure it is completely dry. Cut the seal to the required length using standard cutting tools. Remove the protective film from the adhesive backing, then press the seal firmly into position along the gap. Apply consistent pressure along the full length to ensure even bonding.
Conduct visual inspections at least once per month to check for cracking, adhesive peeling or water seepage. Replace the seal promptly if damage is detected, as worn seals may allow water leakage that can damage surrounding building materials.
Choose seal colors based on the overall color palette of the bathroom space, coordinating with tile, wall and fixture finishes. Neutral color options integrate with most decor styles. Color samples are available for on-site evaluation before placing large commercial orders.
Once the adhesive backing has fully cured after installation, removal may compromise bonding performance and cause material deformation or tearing. For replacement or re-installation projects, use a new seal to ensure consistent sealing performance.
Inspect installed seals at least once per month for signs of cracking, peeling or water leakage. Early identification of wear allows for timely replacement, which prevents extended moisture exposure to floors and walls.
