 |
FC-040
KLAN
| Quantity: | |
|---|---|
The FC-040 glass door seal is a PVC extrusion profile designed to seal gaps between glass panels in shower enclosures and glass partition systems. The product features a rigid PVC clamping section that secures onto the glass edge, paired with flexible sealing fins that close the gap between adjacent glass surfaces. This configuration helps contain water spray within the shower area and reduces water migration onto bathroom floors.
The seal is supplied in standard 2.2-meter lengths, with custom lengths available upon request to match specific project requirements. The clear material with a subtle blue tint maintains visual consistency with most glass shower installations. Each unit is manufactured using co-extrusion technology, which bonds the rigid and flexible PVC sections in a single production step.
The clamping portion of the FC-040 seal is made from rigid PVC formulated to maintain dimensional stability across the product's operating temperature range. The profile includes internal gripping structures that hold the seal onto the glass edge without requiring adhesive. The clamping mechanism is designed for 12mm glass as standard, with compatible versions available for glass thicknesses from 5mm to 12mm.
The sealing fins are produced from a flexible PVC compound that compresses when glass panels meet at the closed position. The flexible material conforms to minor variations in glass alignment, helping maintain a consistent seal along the full length of the joint. The PVC formulation includes anti-UV and anti-mold additives, which support performance in humid bathroom environments.
The FC-040 seal has a cross-sectional width of approximately 32mm, which covers the gap between two glass panels plus the clamping area on each side. The following table summarizes the key dimensional specifications:
Parameter | Specification |
Model | FC-040 |
Suitable glass thickness | 5-12mm (standard: 12mm) |
Cross-section width | 32mm |
Standard length | 2.2m |
Custom length | Available upon request |
Color | Clear with blue tint |
Material | Rigid PVC + flexible PVC (co-extruded) |
Temperature range | 5°C to +70°C |
Glass thickness options are available for 6mm, 8mm, 10mm, and 12mm glass. Commercial buyers ordering in volume may request specific length configurations to reduce on-site cutting waste.
Installation of the FC-040 seal does not require adhesive or specialized tools. The rigid clamping section is pressed onto the glass edge by hand, and the internal grip structures hold the seal in position. Before installation, measure the glass thickness and the gap between glass panels to confirm the correct seal model. The seal can be cut to length on site using standard cutting tools.
To clean the seal, wipe it with a damp cloth or a mild soap solution. Avoid abrasive cleaners or scrubbing pads, as these may scratch the PVC surface. Regular cleaning helps prevent soap residue and mineral deposit buildup on the sealing fins.
The FC-040 glass door seal is used in residential and commercial shower installations, including hotel bathrooms, fitness center shower facilities, and residential glass shower enclosures. It is also suitable for glass partition doors in office buildings and public restrooms where water containment is required.
For commercial procurement, the product supports volume orders with custom length options, which can help reduce installation time and material waste on large-scale projects.
Measure the glass thickness first, then choose the corresponding seal version (6mm, 8mm, 10mm, or 12mm). Also measure the gap between the glass panels when the door is closed to ensure the seal fins cover the gap fully.
No, the seal uses a clip-on design with internal gripping structures that hold it onto the glass edge. No adhesive is needed, which simplifies installation and allows for easy removal if replacement is required.
Yes, the seal can be cut to the required length using standard cutting tools. This allows installers to adapt the product to different door heights and project specifications.
Custom length options are available for volume orders. Contact the sales team with your required length specifications and quantity to receive pricing and lead time information.
