 |
FC-005
K&LAN
| Quantity: | |
|---|---|
The FC-005 135° shower door seal is a PVC extrusion profile designed for corner shower enclosures where two glass panels meet at a 135-degree angle. This type of configuration is common in diamond-shaped shower stalls and corner shower installations, where standard straight seals cannot properly cover the angled joint.
The seal features a rigid PVC clamping section that attaches to one glass panel, combined with a flexible sealing fin that makes contact with the adjacent panel at the 135-degree corner. This angled design helps close the gap at the corner junction, reducing water escape from the shower enclosure.
Unlike straight door seals that seal gaps between parallel or perpendicularly meeting glass panels, the FC-005 seal is shaped to accommodate glass panels joined at 135 degrees. The sealing fin is oriented to make consistent contact with the second glass panel across the full height of the corner joint. This angle-specific design helps ensure uniform sealing performance along the entire vertical edge of the corner.
The seal is available in versions for 6mm, 8mm, 10mm, and 12mm glass thicknesses. The sealing fin length varies by glass thickness to maintain proper contact pressure at the 135-degree angle. Thicker glass versions use a shorter fin, while thinner glass versions use a longer fin to bridge the gap at the corner.
The FC-005 seal is manufactured using a co-extrusion process that combines two PVC formulations in a single profile. The rigid PVC clamping section provides structural rigidity and holds the seal securely on the glass edge. The flexible PVC sealing fin compresses against the adjacent glass panel to form the water barrier.
The PVC formulation includes anti-UV and anti-mold additives, which help maintain material performance in humid shower environments. The seal is rated for operation within a temperature range of 5°C to +70°C, covering standard indoor bathroom conditions.
The following table provides the complete specifications for the FC-005 135° shower door seal:
Parameter | Specification |
Model | FC-005 |
Angle | 135° |
Suitable glass thickness | 6mm / 8mm / 10mm / 12mm |
Sealing fin length (6mm glass) | 5-16mm |
Sealing fin length (8mm glass) | 5-16mm |
Sealing fin length (10mm glass) | 5-16mm |
Sealing fin length (12mm glass) | 16mm |
Standard length | 2.2m |
Available lengths | 1.85m / 1.9m / 2.0m / 2.2m / 2.4m / 2.5m / 3.0m / 6.0m / custom |
Color | Transparent with slight blue tint |
Material | 100% new PVC with anti-UV and anti-mold additive |
Technology | Rigid PVC and soft PVC extruded together |
Function | Prevent water leakage |
Temperature range | 5°C to +70°C |
Package | 100pcs / 150pcs / 200pcs per carton |
Customization | Custom designs and packing available |
Loading port | Huangpu port or other ports in Foshan, Shenzhen, Guangzhou |
Measure the glass thickness to confirm the correct seal version.
Measure the vertical height of the glass edge where the seal will be installed.
Cut the seal to the required length using standard cutting tools.
Press the rigid clamping section onto the glass edge, starting from one end and working along the full length.
Verify that the flexible sealing fin makes consistent contact with the adjacent glass panel at the 135-degree corner.
Proper alignment at the 135-degree corner is important for consistent sealing performance. The sealing fin should make uniform contact along the full height of the adjacent glass panel. If the contact pressure is uneven, adjust the seal position or verify that the glass panels are correctly aligned at the corner.
Clean the seal regularly with a damp cloth and mild soap solution to remove soap residue and mineral deposits. Avoid abrasive cleaners or scrubbing tools that may scratch the PVC surface.
The FC-005 135° shower door seal is used in corner shower enclosures and diamond-shaped shower stalls in both residential and commercial settings. Typical commercial applications include hotel bathrooms, spa facilities, fitness center showers, and multi-unit residential projects with corner shower configurations.
For commercial procurement, the product supports volume orders with custom length options and customized packaging. This can help reduce installation labor and material waste on large-scale projects.
The 135° seal is designed for corner shower enclosures where two glass panels meet at a 135-degree angle, such as diamond-shaped shower stalls and neo-angle corner showers. Measure the angle of your glass corner before ordering to confirm compatibility.
Measure the thickness of your glass panel at the edge where the seal will be installed. The FC-005 seal is available for 6mm, 8mm, 10mm, and 12mm glass. Choose the version that matches your glass thickness.
Yes, the seal can be installed on either side of the glass corner by flipping the orientation. The clamping section attaches to one panel, and the fin seals against the other.
Custom packaging options are available for volume orders. Contact the sales team with your packaging requirements and order quantity to receive pricing details.
