 |
FC-116
K&LAN
| Quantity: | |
|---|---|
Engineered with multi-chamber aerogel-infused EPDM foam, this seal strip combines a closed-cell core (density 28±2 kg/m³) and a wear-resistant CR rubber outer layer (Shore A 75±5). The interlocking "WaveLock" geometry enhances compression recovery by 55% compared to conventional designs. Utilizing co-extrusion molding technology, it integrates a stainless steel 304 reinforcing spine for structural stability. Available in 18 cross-sections (E-type, U-type, etc.) with UV-resistant color options (RAL codes customizable). The embedded capillary drainage channels (0.8mm width) prevent water pooling, while laser-etched installation guides ensure ±0.5mm alignment accuracy.
1. Extreme temperature tolerance: -65°C to +180°C (MIL-STD-810G Method 501.5/502.5)
2. Thermal conductivity: 0.032 W/m·K (ASTM C518), reducing energy transfer by 27%
3. Compression set: ≤8% after 15,000 cycles (ISO 815-B)
4. Fire safety: EN 13501-1 Class B-s2,d0 + IMO FTP Code Part 5 certified
5. Adhesion systems: 3M™ VHB™ F9469PC, Sika® Tack-Melt, or mechanical fasteners
Achieves 40-year service life in coastal environments through anti-ozone/anti-UV additives (ASTM D1149-07). The "SmartSeal" memory foam technology recovers 99.3% original thickness within 15 seconds post-compression. Complies with Passive House Institute (PHI) standards for airtightness (n50≤0.6 h⁻¹). Reduces HVAC costs by 19-25% in commercial buildings through superior thermal bridging resistance.
Construction: High-rise curtain wall pressure-equalization systems, passive house windows
Transport: Refrigerated container doors (-40°C applications), EV battery enclosure seals
Energy: Solar tracker motor gaskets (IP69K-rated), wind turbine nacelle sealing
Q: How to handle corners/curves?
A: Use our FlexCore™ variant (minimum bending radius 12mm) with pre-applied butyl tape.
Q: Chemical compatibility?
A: Resists Skydrol® LD-4, deicing fluids, and pH 2-12 solutions (48h immersion test passed).
Q: Custom tooling lead time?
A: 28 business days for extrusion dies up to 150mm width (MOQ 2,000m).
Engineered with multi-chamber aerogel-infused EPDM foam, this seal strip combines a closed-cell core (density 28±2 kg/m³) and a wear-resistant CR rubber outer layer (Shore A 75±5). The interlocking "WaveLock" geometry enhances compression recovery by 55% compared to conventional designs. Utilizing co-extrusion molding technology, it integrates a stainless steel 304 reinforcing spine for structural stability. Available in 18 cross-sections (E-type, U-type, etc.) with UV-resistant color options (RAL codes customizable). The embedded capillary drainage channels (0.8mm width) prevent water pooling, while laser-etched installation guides ensure ±0.5mm alignment accuracy.
1. Extreme temperature tolerance: -65°C to +180°C (MIL-STD-810G Method 501.5/502.5)
2. Thermal conductivity: 0.032 W/m·K (ASTM C518), reducing energy transfer by 27%
3. Compression set: ≤8% after 15,000 cycles (ISO 815-B)
4. Fire safety: EN 13501-1 Class B-s2,d0 + IMO FTP Code Part 5 certified
5. Adhesion systems: 3M™ VHB™ F9469PC, Sika® Tack-Melt, or mechanical fasteners
Achieves 40-year service life in coastal environments through anti-ozone/anti-UV additives (ASTM D1149-07). The "SmartSeal" memory foam technology recovers 99.3% original thickness within 15 seconds post-compression. Complies with Passive House Institute (PHI) standards for airtightness (n50≤0.6 h⁻¹). Reduces HVAC costs by 19-25% in commercial buildings through superior thermal bridging resistance.
Construction: High-rise curtain wall pressure-equalization systems, passive house windows
Transport: Refrigerated container doors (-40°C applications), EV battery enclosure seals
Energy: Solar tracker motor gaskets (IP69K-rated), wind turbine nacelle sealing
Q: How to handle corners/curves?
A: Use our FlexCore™ variant (minimum bending radius 12mm) with pre-applied butyl tape.
Q: Chemical compatibility?
A: Resists Skydrol® LD-4, deicing fluids, and pH 2-12 solutions (48h immersion test passed).
Q: Custom tooling lead time?
A: 28 business days for extrusion dies up to 150mm width (MOQ 2,000m).
